6000N Single Axis 12V Solar Sun Tracker Kits &18" DC Linear Actuator &Controller

6000N Single Axis 12V Solar Sun Tracker Kits &18

$99.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Los Angeles, California, United States
Ships to: US,
Item: 196333308639

eBay 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller Here for sale is Complete Single Axis Solar Tracker Kits, items Include a 6000N 450mm/18″ Stroke Linear Actuator &Mounting Brackets and the Electronic LCD Controller you need for a single axis solar tracker system. Build your own frame and you will get a professional grade single axis solar tracker! Package Included: ★ 1x 6000N 450mm 18″ Stroke DC 12V Linear Actuator. ★ 1x LCD Single Axis Solar Tracker Controller +Light Sensor+IR Remote. ★ 2x Mounting Brackets W/ 2PCS bolt and 2PCS cotter pin for the linear actuator. Wiring Diagram: Note 1: The battery in the photo is only for reference and is not included in the package. Note 2: Make sure the input voltage for the whole system is DC 12V and the input current is no less than 5A. Note 3: The solar tracker controller box is not waterproof, remember to protect it when assembling. About the Linear Actuator: For this 6000N linear actuators, we provide 150/200/300/400/450mm Stroke Length, here for sale is the 450mm 18″ Stroke, if you need other size, Pls Click Here About the Solar Tracker Controller: This is WST03-3 Single Axis Solar Tracker Controller, items include the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control, we will provide English Manual together with the items. The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction to execute positive rotation, reverse rotation and stop, and make the platform to be aligned with the sun. Three Modes will appear during the controller’s auto working, the controller will automatically switch the three modes according to different conditions. The three Modes are: Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode. Users can set the parameters and working modes by the LCD screen for actual needs. There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time. Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs. We provide more instruction and detailed settings in the English User’s Manual. Specification: Product Name WST03-3 Solar Tracker Controller Brand SZMWKJ Condition 100% New Controller Box Dimension 145x90x40mm (5.71″x3.54″x1.57″) Input Voltage DC 12V/24V (DC 9V~35V) Max Load Current 15A Operating Temperature -20℃ to +60℃ Tracking Accuracy ≤1° Controller Box: Controller Features: 1. High tracking accuracy, average tracking accuracy ≤ 1° (Actual accuracy is related to the platform’s moving speed); 2. The light sensor has a wide range of detection angle and high accuracy. It’s inside the waterproof case, waterproof, dustproof and anti-aging; 3. With LCD display which can show multiple working modes and parameters; 4. Many of the parameters can be set (Tracking accuracy, threshold value of light-sensor, threshold value of wind speed sensor, interval time of cyclical tracking, etc…); 5. With strong wind protection mode (Wind speed sensor is required); 6. Can set the platform to stay at any position at night (or cloudy day); 7. Can add extra limit switches; 8. Can be operated by IR remote control or the buttons on the controller box; 9. Reverse battery protection, overcurrent protection; standby current ≤15mA. Controller Attention Matters: 1.Input Power Supply: DC 12V/24V (DC 9V~35V); Output Voltage=Input Voltage; Output Current: ≤15A. 2.The controller needs stable power supply, it can be battery or switching power supply, solar panels cannot be directly connected as power supply, unstable voltage may damage the controller. The maximum current of the power supply must be greater than 1.5 times of the total load current of the platform, because the starting current for DC motor is relatively large. 3.This controller can directly drive DC brush motor, the rated voltage of the motor should be the same as the power voltage of the controller. If use other types motor, this controller cannot directly drive, in this case additional control circuit need to be added. 4. If the total load current of the platform is greater than 15A, a relay module is needed to increase the load capacity of the controller. 5.The controller is preferably fixedly installed and will not move together with the platform. The controller is not waterproof and should prevent water from entering. Light Sensor and IR Remote: Light Sensor Attention Matters: 1. The light sensor should be fixed on the platform and can move together with the platform, it cannot be blocked by anything. 2. The base of the light sensor must be parallel to the solar panel or on the same plane. 3. The “East” direction marked on the light sensor must be consistent with the local geographic direction. 4. The length of the connecting wire for the light sensor must be greater than the platform’s movable range. (Factory default length is 3 meters, it can be increased to 30 meters at most) IR Remote Attention Matters: 1. The remote control requires 2 pieces AAA batteries (factory defaults no batteries inside). 2. The remote control belongs to infrared remote control, it must be aligned with the controller when using, the remote control range is ≤ 6 meters. 3. The buttons on the remote control have the same function as the buttons on the controller box. Product Highlights of the Solar Tracker System: * Standard 1 year warranty. * Free-maintenance. * Easy-installation. * Single axis tracker provides up to 35% more power production. * Engineered to hold up to 1000 Watts of solar panels. * Waterproof with IP65. * Small self–consumption. Caution: * The Input Voltage for the whole system should be DC 12V. * Never approach a solar tracker while the Solar Tracker electronics are “on”. * The solar tracker can move unexpectedly and the powerful linear actuator/motor can cause serious injury or death. * Always disconnect the Solar Tracker electronics from its power supply before approaching the solar tracker. Application: Solar tracking system: Solar photovoltaic System, solar thermal system,etc. About Shipping: * This item will be shipped out within 1-3 Business Days after confirmed payment received. * Goods are in stock in USA warehouses, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer. On Apr 12, 2024 at 00:19:31 PDT, seller added the following information:

Frequently Asked Questions About 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller in My Website

humusjardin.com is the best online shopping platform where you can buy 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller on humusjardin.com?

Humus Jardin

6000N Single Axis 12V Solar Sun Tracker Kits &18" DC Linear Actuator &Controller

Frequently Asked Questions About 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller in My Website

What are the best-selling 6000N Single Axis 12V Solar Sun Tracker Kits &18″ DC Linear Actuator &Controller on humusjardin.com?

Laisser un commentaire Annuler la réponse