AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit

$512.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store rburchfield55
(56395) 99.7%,

Location: Virginia Beach, Virginia
Ships to: US,
Item: 176160083080

Returns Accepted:ReturnsNotAccepted
AEM Electronics:AEM Electronics
OE/OEM Part Number:30-3300
Manufacturer Warranty:1 Month
Items Included:Methanol Injection Kit
Manufacturer Part Number:30-3300
MPN:30-3300
Universal Fitment:Yes
Vintage Part:No
Performance Part:Yes

AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction KitSold as Each (1 Kit) Water/Methanol for High Compression Naturally Aspirated and Forced Induction Gas EnginesAEM offers two different water/methanol controller designs. One is boost dependent (Kit PN 30-3300) for forced induction vehicles up to 35 PSI of boost. The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup. The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. Robust, Easy to Use Controller Designs The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs. Boost Safe Feature These new controllers retain the « Boost Safe » injection failsafe system, which is an output that will activate if there is a short, loss of continuity or high or low voltage or low fluid condition, allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Simplified Wiring The new wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. An integrated Pump Ground circuit is included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Improved Injector Flow Rate & Nozzle Sizes AEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control. Three resized injector nozzles are in each kit and allow for improved flow capability (a flow graph is available on our website). New Low Level Fluid Indicator A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris. Controller Features: 30-3300 Boost Dependent kit (up to 35PSI) includes molded-in nipple for boost hose 30-3350 Multi Input kit for high compression naturally aspirated and forced induction applications Large adjustment knobs and numbering for easy programming Covered status LED and test button for improved splash resistance Integrated plug for mating to positive-lock connector on harness Integrated fuse and mounting tabsFeatures:Terminated harness features positive lock connector with integrated pump ground circuit and additional wire for optional on/off flow solenoid1 Gallon tank with built-in conductive low fluid level indicatorIncludes “Boost Safe” readiness failsafe systemOne machined billet injector with integral check valve to prevent unintended flowThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)Recirculation-style pump with integral fittings for quiet operationLED dash light for system status and low fluid warning20 ft. of high-pressure Nylon injection tubingCompatible with Today’s Complex Fuels CCS Kits are supplied with the highest quality components that meet or exceed original equipment specifications and all CCS kits are compatible with today’s complex fuel All returns must be pre-approved before returning. Absolutely No Refund on installed items or returned items in non-sellable condition. Buyer to pay returned shipping Cost. All Electrical items Carburetor Kits and Fuel Injection Kits will be shipped in sealed clear Package if the package is un-wrapped the item is nonreturnable. Carburetor Collectible Specialty Thanks You for Your Support! Please before leaving Feedback If you receive an order that does not meet your Expectations, please permit us the opportunity to fix the problem before leaving negative feedback or rating us. Keep in mind our prices are controlled by eBay rating process. We strive for perfection and welcome the opportunity to correct any issues with your order. Your satisfaction is our #1 importance. Shipping Time Most items will be shipped Same business day if ordered before 10:00 a.m. EST. A delay in payment equals a delay in shipping. Our Pro-Series Carburetors with customer specs will be shipped within five days. CCS Performance Carburetor is a complete service seller not an Empty Wagon Seller (drop shipper). Every item you see on our websites will be in stock and complete to ship within 24 hours of payment. To meet the price Competitive Ecommerce market, we purchase direct from the manufacturers in bulk quantities and package some items in house. Contact us. Email is the quickest way to contact us. You will receive a response within 48 hours. Please limit your questions to the products we sell. If you have purchased one of our Performance Series Carburetors a Tech Support phone number will be provided in the technical information supplied with each carburetor purchase. Let CCS make your EBay experience a Great One!

Frequently Asked Questions About AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit in My Website

humusjardin.com is the best online shopping platform where you can buy AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit on humusjardin.com?

Humus Jardin

AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit

Frequently Asked Questions About AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit in My Website

What are the best-selling AEM V3 1.15 Gallon Water/Methanol Injection Kit H20 30-3300 Forced Induction Kit on humusjardin.com?

Laisser un commentaire Annuler la réponse