Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011

$139.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store rmstatorinc
(69801) 99.0%,

Location:
Ships to: US,
Item: 353447949295

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
RMSTATOR:RMSTATOR
Manufacturer Part Number:RMS022-105928–M–D
Replaces OEM Part#:31600-MGZ-J01, 21066-0008, 1D7-81960-00-00, 278002021, 32800-26J0
Warning:This is a multifit part. See description below.

eBay Free shipping in USA 2 year warranty Same day shipping visit our store > find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Machined Aluminum Mosfet Regulator for Ducati Multistrada 1200 2010 2011 | OEM Repl.# 0000516 KEY FEATURES RUNS 33% COOLER THAN OEM PART: RMSTATOR exclusive aluminum alloy formula optimize the heat transfer from electronic parts to outside casing better than any other cast casing, including OEM parts. STURDY CONSTRUCTION: Our voltage regulator casing is machined from a high quality billet aluminum block using precise automated CNC machine making the part stronger than imprecise casting process. STRONGER CORROSION PROTECTION: Our colored anodizing process add a protective layer on the part to keep it from corroding. PRO-FIT SYSTEM: Includes everything required to perform a RMSTATOR-style professional installation like opposite connectors and dielectric connector grease to get rid of OEM corroded harness connectors. PURCHASE WITH CONFIDENCE: 2-Year warranty. All products are rigorously tested. DESCRIPTION 2006 2007 Can-Am Outlander 400 fitment requires a special installation. Refer to the ?Installation? tab at the bottom of this page to see all the details Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. Please note: that there are multiple regulators possible for some Triumph models. Please take a look at the list below to see if your triumph model is there, if so if it’s the right part: Bonneville from 2017 to 2020 with a VIN Lower than 513324. If you have a HIGHER VIN you should look for parts # RM30405 / RMS020-103436 Street Triple Standard 2008 to 2017 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104 and for models with VIN lower than 354281, please refer to OEM T1300570 Street Triple 1994 to 2018 : This part will only fit on Street Triple with a VIN higher than 499574 and a Non ABS version or higher than 499957 and a ABS version. If you vehicle has a VIN between 210445 and 461331, please refer to OEM T1304045. If your vehicle has a VIN between 461332 and 499573 and a non ABS version, refer to OEM T1300165. If your vehicle has a VIN between 461332 and 499956 and a ABS version, refer to OEM T1301564. If you vehicle has a VIN BETWEEN 141872 and 210444, refer to part # RM30507 / RMS022-106230. If you vehicle has a VIN lower than 141871, please refer to OEM T1300021. If your vehicle has a carburator, please refer to part # RM31000. Street Triple 2019 to 2020 This part will only fit on Street Triple Standard with a VIN higher than 456777. For models with a VIN BETWEEN 354282 and 456776, please refer to part # RM30104 and for models with VIN lower than 354281, please refer to OEM T1300570 Street Triple R 2008 to 2020 This part will only fit on Street Triple R with a VIN higher than 456777. If your vehicle has a VIN BETWEEN 354282 and 456776, please refer to part # RM30104. Please always compare your original part to our photos to make sure you are purchasing the right part. There are two possible regulators for the Can-Am Outlander 1000 2012 and many Outlander Max 500 models. This regulator fits mostly the North American versions of these models. For the European / International versions, the right regulator is part RM30322. Always check in the ‘Fits models’ section and please compare to your original part before buying. Brand new RMSTATOR Red Machined Aluminum Mosfet Regulator Our new red machined aluminum Mosfet voltage regulator is a great upgrade for heat dissipation in any powersports charging system. After 10 minutes of use, our billet aluminum heatsink runs cooler by 33% than standard cast regulator housings. Our new red regulator, equipped with the renowned Mosfet regulation technology, is an added value to any three-phase permanent magnet charging system. STOP BURNING YOUR REGULATOR RECTIFIER ! It is time to update or replace your voltage regulator with the advanced MOSFET type. It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up, it will simply turn off for a while and cool off. Direct replacement to your original unit Plug-and-play, direct fit, easy installation The quality exceeds the OEM equipment Improved heat sink and charging capabilities Higher grade of electric components All shipped products are tested We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues. *All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part. Why use Mosfet Enhanced technology? Runs cooler Runs much cooler than the traditional Shunt voltage regulator rectifier. Saves gas Less load on the stator, less work, less fuel is used and you save. Regulated energy The power charging your battery is steadier and smooth. Extended battery life Extends the battery’s life and cold cranking capacity. More engine power Removes stator load resulting in more engine power. Optimized power Optimize power delivery by switching the stator coils on or off. With design This product is an advanced design that lowers operating temperatures for extended longevity and better performance than the OEM part. Vehicle models fitment Ducati 1199 Panigale EFI L/C — 2012-2014 Ducati 1199 Panigale R EFI L/C — 2014-2016 Ducati 1299 Panigale EFI L/C — 2015-2016 Ducati 1299 Panigale R Finale Edition EFI L/C — 2018 Ducati 899 Panigale — 2014-2015 Ducati 959 Panigale Corse EFI L/C — 2018 Ducati 959 Panigale EFI L/C — 2016-2018 Ducati Diavel 1200 EFI L/C — 2013-2017 Ducati Diavel Carbon 1200 EFI L/C — 2013-2017 Ducati Hyperstrada 820 — 2013-2015 Ducati Hyperstrada 939 EFI L/C — 2016 Ducati Multistrada 1200 — 2010-2011 Ducati Multistrada 1200 EFI L/C — 2013-2017 Ducati Multistrada 1200 Enduro Pro EFI L/C — 2018 Ducati Multistrada 1260 — 2018 Ducati Multistrada 950 EFI L/C — 2017 Ducati Panigale R 1285 — 2017 Ducati Panigale V4 1100 — 2018 Ducati Superbike 1299 EFI L/C — 2017 Ducati Supersport 939 — 2017-2018 Ducati Xdiavel 1200 EFI L/C — 2016-2017 OEM part replacement 31600-MGZ-J01 21066-0008 1D7-81960-00-00 278002021 32800-26J01 0824-078 21066-0022 21066-0714 21066-0744 0800-177000 27D-81960-00-00 31600-HP0-A01 31600-HR0-F01 31600-MJF-A01 710000261 T1300470 T1300675 8JP-H1960-00-00 31600-HN8-003 0000516 21066-0771 31600-HN8-000 32800-26J00 54040301B 710000870 710001103 1D7-81960-01-00 0824-072 12318523367 4012941 515177325 710000908 710005569 32800-26J02 710000907 703500717 Specifications Dimensions: Width: 103 mm Length: 103 mm Height: 28 mm Fixation holes center to center: 80 mm Other specifications: Number of plugs: 2 Number of pins: 5 Number of wires: 0 Minimum Charging Voltage: 14.5 V +- 0.5 V Maximum Charging Current: 50 A / 500 W Open Circuit Voltage: 15 V Operation Temperature: -20?C to 85?C instructions Before installing your new CNC Voltage Regulator Rectifier: Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. 2006 2007 Can-Am Outlander 400 Installation Particularities If you are using this regulator for 2006 2007 Can-Am Outlander 400 fitments, it will function perfectly fine. You will need convert your vehicle wiring to our included mating connectors. From your original stator connector, the outer 2 Yellow wires will be spliced into 1, the center 2 Yellow wires will be spliced into 1, and the opposite outer 2 Yellow wires will be spliced into 1. These go into our Grey connector in any location, there is no order. The Red Battery + goes to the inner terminal of the Black connector. The Brown Battery – (ground) wire goes to the outer terminal of the Black connector. The center terminal of the black connector is not used. You will need relocate or build a mounting bracket for this regulator, it will not mount like the original regulator for this application. Item Delivery Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period. If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes. customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. Customer service Part request About us About seller page Add seller to favorite

Frequently Asked Questions About Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011 in My Website

humusjardin.com is the best online shopping platform where you can buy Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011 from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011 on humusjardin.com?

Humus Jardin

Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011

Frequently Asked Questions About Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011 in My Website

What are the best-selling Machined Aluminum Mosfet Regulator for Ducati Multistrada Diavel 1200 2010-2011 on humusjardin.com?

Laisser un commentaire Annuler la réponse