Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol

$186.75 Buy It Now or Best Offer
free,30-Day Returns

Seller Store savossolutions
(0) 0.0%,

Location: Inverness, Florida
Ships to: US,
Item: 296728473586

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
SAVO’S SOLUTIONS:SAVO’S SOLUTIONS
Type:N/A

Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenolic Compact design Seat is constructed of durable, water-resistant, ivory colored, 5/16″ (8mm) thick solid phenolic Frame and mounting bracket are type 304 stainless steel and self-locking mechanism Supports up to 500 lbs (227 kg) when properly installed Seat 18″ (455mm) wide, projects 15 13/16″ (400mm) from wall SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended Consult and comply with local building codes To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 500lbs(227 kg) To avoid potential seat malfunction, DO NOT use seat if weight exceeds 500 lbs (227 kg) Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury MATERIALS:Seat — One-piece, 5/16″ (8mm) thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivory-colored face sheets, and black phenolic-resin core that are integrally bonded — cannot delaminate. Integral slots for water drainage. Secured to frame with stainless steel carriage bolts and acorn nuts.Frame — 18-8, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4″ (30mm) square tubing and 18 -gauge (1.2mm), 1″ (25mm) diameter seamless tubing. Mounting Flanges (2) — 18-8, type-304, 3/16″ (5mm) thick stainless steel with satin finish. 3″ (75mm) diameter with three mounting screw holes.Baseplate — 18-8, type-304, heavy-gauge stainless steel.Spring — 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate.Guide Bracket — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish.OPERATION:Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position until released by pulling the top of seat away from wall. Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning. Nonporous solid phenolic seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria. Slotless round-head carriage bolts and acorn nuts provide additional safety to user. Bobrick shower seats, when properly installed, have sufficient strength to support 500 lbs., (227 kg) complying with accessible design guidelines (including ADAAG in the U.S.A.).INSTALLATION:Secure unit to wall at points indicated by an S, with the two mounting flanges located at top and the baseplate and guide bracket below. The bottom of support bracket must be positioned between the baseplate and guide bracket before they are secured to wall or partition. Mounting height of shower seat must comply with local building codes.For stud walls, provide concealed backing to comply with local building codes and secure with #14 x 2-1/2″ (6.3 x 65mm) stainless steel sheet-metal screws furnished by manufacturer.For prefabricated shower stalls, provided adequate backing by the shower stall manufacturer. Secure with #14 x 2-1/2″ (6.3 x 65mm) stainless steel mounting screws furnished by manufacturer. Bobrick offers a mounting kit for installing shower seats. For additional mounting kits please order 252-30. One mounting kit is required for each flange.For masonry walls, provide fiber plugs or expansion shields for use with furnished sheet-metal screws, or provide 1/4″ (6mm) toggle bolts or expansion bolts.INSTALL SAFETY PLATE TO WALL:Safety Plate is to be mounted on wall near Shower Seat in order to properly advise users of the Seat’s weight restrictions. Correct installation of the Safety Plate will ensure that the Shower Seat meets A.N.S.I. Standards. Permanently affix Safety Plate to wall on either side of the Shower Seat at a minimum height of 30″ (760mm). If mounted above Seat, the Plate must be high enough so that it is not covered when Seat is on the up position. Mounting screws (4) are recommended, but double-sided tape on rear of Plate may be used for very smooth, non-porous surfaces Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenolic Compact design Seat is constructed of durable, water-resistant, ivory colored, 5/16″ (8mm) thick solid phenolic Frame and mounting bracket are type 304 stainless steel and self-locking mechanism Supports up to 500 lbs (227 kg) when properly installed Seat 18″ (455mm) wide, projects 15 13/16″ (400mm) from wall SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended Consult and comply with local building codes To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall In the interests of safety and the protection of end users, this seat should not be uséd to support weights exceeding 500lbs(227 kg) To avoid potential seat malfunction, DO NOT use seat if weight exceeds 500 lbs (227 kg) Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury MATERIALS: Seat — One-piece, 5/16″ (8mm) thick, solidly fuséd plastic laminate with matte-finish melamine surfaces, ivory-colored face sheets, and black phenolic-resin core that are integrally bonded — cannot delaminate. Integral slots for water drainage. Secured to frame with stainless steel carriage bolts and acorn nuts. Frame — 18-8, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4″ (30mm) square tubing and 18 -gauge (1.2mm), 1″ (25mm) diameter seamless tubing. Mounting Flanges (2) — 18-8, type-304, 3/16″ (5mm) thick stainless steel with satin finish. 3″ (75mm) diameter with three mounting screw holes. Baseplate — 18-8, type-304, heavy-gauge stainless steel. Spring — 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate. Guide Bracket — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. OPERATION: Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position until released by pulling the top of seat away from wall. Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning. Nonporous solid phenolic seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria. Slotless round-head carriage bolts and acorn nuts provide additional safety to user. Bobrick shower seats, when properly installed, have sufficient strength to support 500 lbs., (227 kg) complying with accessible design guidelines (including ADAAG in the U.S.A.). INSTALLATION: Secure unit to wall at points indicated by an S, with the two mounting flanges located at top and the baseplate and guide bracket below. The bottom of support bracket must be positioned between the baseplate and guide bracket before they are secured to wall or partition. Mounting height of shower seat must comply with local building codes. For stud walls, provide concealed backing to comply with local building codes and secure with #14 x 2-1/2″ (6.3 x 65mm) stainless steel sheet-metal screws furnished by manufacturer. For prefabricated shower stalls, provided adequate backing by the shower stall manufacturer. Secure with #14 x 2-1/2″ (6.3 x 65mm) stainless steel mounting screws furnished by manufacturer. Bobrick offers a mounting kit for installing shower seats. For additional mounting kits please order 252-30. One mounting kit is required for each flange. For masonry walls, provide fiber plugs or expansion shields for use with furnished sheet-metal screws, or provide 1/4″ (6mm) toggle bolts or expansion bolts. INSTALL SAFETY PLATE TO WALL: Safety Plate is to be mounted on wall near Shower Seat in order to properly advise users of the Seat’s weight restrictions. Correct installation of the Safety Plate will ensure that the Shower Seat meets A.N.S.I. Standards. Permanently affix Safety Plate to wall on either side of the Shower Seat at a minimum height of 30″ (760mm). If mounted above Seat, the Plate must be high enough so that it is not covered when Seat is on the up position. Mounting screws (4) are recommended, but double-sided tape on rear of Plate may be uséd for very smooth, non-porous surfaces &times Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting « Buy It Now » or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like ASI 0345 Commercial Liquid Soap Dispenser, Surface-Mounted, Manual-Push, Stainle ASI 0210 Commercial Paper Towel Dispenser, Surface-Mounted, Stainless Steel ASI 0264-1A Commercial Double Roll Toilet Paper Dispenser, Surface-Mounted, Meta Bobrick B-347 Combination Commercial Seat-Cover Dispenser/Toilet Paper Dispenser Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SAVO’S SOLUTIONS Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting « Buy It Now » or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Frequently Asked Questions About Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol in My Website

humusjardin.com is the best online shopping platform where you can buy Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol on humusjardin.com?

Humus Jardin

Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol

Frequently Asked Questions About Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol in My Website

What are the best-selling Bobrick B-5191 Barrier Free Commercial Shower Seat, 500 lb Load Capacity, Phenol on humusjardin.com?

Laisser un commentaire Annuler la réponse