CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER

$139.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Anaheim, California, United States
Ships to: US,
Item: 172404754885

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
ClutchXperts:ClutchXperts
Type:Clutch Kit
Disc Diameter:9.06 in (230 mm)
Manufacturer Part Number:CXP-82808OE-EXE-RD4
OE/OEM Part Number:04-130 52332203 GM-009 K1904-01 381207
Additional OE/OEM Part Numbers:200.43010, 19245400, 15608691, 15608692, 82808
Transmission Type:Manual Transmission
Disc Material:Ceramic-Miba
Number of Teeth:148 Ring Gear Teeth
Input Spline Quantity:14
Country/Region of Manufacture:United States
Plate Diameter:9.06 in (230 mm) INNER O.D
Input Shaft Diameter:1 inch (25.4 mm)
Performance Part:Yes
Manufacturer Warranty:Yes
Vintage Part:No
Interchange Part Number:19245400 15608691 15608692 14033090, 167513 LFW149
Additional Interchange Part Numbers:167513 LFW149 LFW149 82808
Surface Finish:DUCTILE IRON, COPPER CERAMIC-MIBA
Clutch Disc Style:High Torque 6-Puck Sprung Hub
Clutch Material:Ceramic-Miba
Fitment Type:Direct Replacement
Returns Accepted:Returns Accepted
Type of Transmissions:Stick Shift Manual Transmission Only
Pressure Plate Type:High Clamping Load Push Type Diaphragm
Other Part Number:82808 19245400 15608691 15608692 14033090, 167513
Clutch Pressure Plate:Heavy Duty Push Type
Vintage Car Part:No
Note:Bronze Clutch
Number of Bolts to Crankshaft:6 Bolts Crank Holes
UPC:Does not apply

eBay CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER Description ClutchXperts Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6 Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. ClutchXperts Stage 3 6 Puck Miba Ceramic Racing Disc. A Miba buttons are ULTRA QUALITY Material For Friction Material In The Clutch Market. If you want the best the industry has to offer, ask for ClutchXperts 6 Puck Sprung Copper Ceramic Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality ‘upgrade’ from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!. **The throwout bearing and pilot bearing (if required) included ($80 value) for free! COMPONENTS: ClutchXperts STAGE 3 HEAVY DUTY CLUTCH PRESSURE PLATE COVER (2000LBS CLAMPING LOAD) ClutchXperts STAGE 3 6-PUCK SPRUNG SINTERED RACING DISC ClutchXperts THRUST THROWOUT RELEASE BEARING PILOT BEARING ALIGNMENT TOOL APPLICATION: 1991 – 1992 ISUZU RODEO 4WD 3.1L 6CYL BORG WARNER TRANSMISSION MM5 ITEM SPECIFICATIONS: Brand : ClutchXperts Manufacture Part Number : EC-82008OE-EXE-RD4 Surface Finish : CAST IRON, 6-PUCK COPPER-CERAMIC Torque : 327 lb/ft Horse Power : 348 hp Warranty : Yes Country of Manufacture : United States **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY Image Gallery STOCK PHOTO Payment Shipping Returns RMA # : Message us through eBay for RMA#. We do not allow any return without RMA#. Return Shipping : Buyer is responsible for return shipping cost. Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee). Return : All returns will be subject to 20% restocking fee. Return your purchase for up to 30 days from date of purchase for a refund. Must be in brand new, resalable condition. Damaged Item : Message us through eBay. Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase. Contact Us ClutchXperts, Inc. We are located in Southern California. Please contact us through eBay messages by clicking on « Ask a Question ». Business Hours : 9AM – 5PM Mon-Fri (Pacific Standard Time).

Frequently Asked Questions About CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER in My Website

humusjardin.com is the best online shopping platform where you can buy CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER on humusjardin.com?

Humus Jardin

CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER

Frequently Asked Questions About CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER in My Website

What are the best-selling CLUTCHXPERTS STAGE 3 CLUTCH KIT 1991-1992 ISUZU RODEO 4WD 3.1L BORG WARNER on humusjardin.com?

Laisser un commentaire Annuler la réponse