QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500


QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500
QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 - 1999 Dodge Ram 2500 3500


$42.69 Buy It Now or Best Offer
free,30-Day Returns





Seller Store
() %,

Location: Ontario, California, United States
Ships to: US,
Item: 404640247115

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
cfspeed-autoparts:cfspeed-autoparts
UPC:Does not apply
Manufacturer Part Number:C82727301
Placement on Vehicle:Front
Universal Fitment:No
Manufacturer Warranty:10 Years
Features:Greasable
Items Included:Mounting Hardware
Custom Bundle:No
Type:Pitman Arm
Interchange Part Number:K7238,K7225T
OE/OEM Part Number:Pitman Arm,1994 95 96 97 98 1999 Dodge Ram 2500
Superseded Part Number:1995 1996 1997 1998 1999 Dodge Ram 3500
Modified Item:No
Adjustable:Yes
Performance Part:No
Material:Alloy Steel

eBay 1.Fit For 1994-1999 Dodge Ram 2500 1995-1999 Dodge Ram 3500 2.Package Includes: 1x Pitman Arm -K7238 1x Idler Arm -K7225T 3.Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. Cfspeed-autoparts QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500 1.Fit For 1994-1999 Dodge Ram 2500 1995-1999 Dodge Ram 3500 2.Package Includes: 1x Pitman Arm -K7238 1x Idler Arm -K7225T 3.Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Brand cfspeed-autoparts Manufacturer Part Number C82727301 Placement on Vehicle Front Universal Fitment No Manufacturer Warranty 10 Years Features Greasable Items Included Mounting Hardware Custom Bundle No Type Pitman Arm Interchange Part Number K7238,K7225T OE/OEM Part Number Pitman Arm,1994 95 96 97 98 1999 Dodge Ram 2500 Superseded Part Number 1995 1996 1997 1998 1999 Dodge Ram 3500 Modified Item No Adjustable Yes Performance Part No Material Alloy Steel Payment PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries. All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. Returns WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. We stand behind every product we sell. All of our brand new items come with a 60-Days money-back guarantee. We define the item as defective only if it doesn’t function as described. It is the buyer’s responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. Shipping & handling cost are not refundable. Man-made damage by abuse or wrong operation is not covered by this warranty. No product liability insurance is assumed. Contact Us We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there’s any questions or problems with our products or service, feel free to contact us please. Cfspeed-autoparts DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Shop Category Store Home Suspension Parts ◈ Air Strut Assembly ◈ Air Spring ◈ Air Suspension Compressor ◈ Solenoid Valve Block Truck & Trailer Springs Vehicles ◈ Audi ◈ Bentley ◈ BMW ◈ Buick ◈ Cadillac ◈ Chevrolet ◈ Citroen ◈ Dodge ◈ Ford ◈ GMC ◈ Hyundai ◈ Infiniti ◈ Isuzu ◈ Jaguar ◈ Jeep ◈ Kia ◈ Land Rover ◈ Lexus ◈ Lincoln ◈ Mercedes-Benz ◈ Mercury ◈ Oldsmobile ◈ Porsche ◈ Saab ◈ Toyota ◈ Volkswagen Suspension Kits Air suspension valves solenoid Shocks & Struts Struts & Suspension Kit & Hubs coilovers complete strut battery Switch window tint film Brake System Parts ◈ Brake Calipers ◈ Brake Drums & Brake Shoes Lift Supports Bumper Assembly Steering Knuckle Mass Air Flow Sensor Strut Mount air dryer Power Brake Booster trim tilt motor Removal Tool Control Arm Camber Arm Other Hot Item 4PCS Front Rear Complete Strut & Spring Assemblies For 2003-2008 Toyota Corolla USD 187.93 Rear Pair Air Suspension Air Spring For Lincoln Town Car Mercury Grand Marquis USD 65.87 4PCS Front + Rear Air Suspension Shock Strut For Range Rover Sport LR4 LR3 HSE USD 541.07 Air Suspension Air Spring W01-358-9978 For Firestone 1T15M4 Hendrickson S-28929 USD 87.95 Pair Front Complete Strut & Coil Spring Assembly For 2009-13 Toyota Corolla USD 107.90 Picture New List Item Front Lower Rearward Control Arm Fits 1997-2003 BMW E39 525i 528i 530i K80530 USD 29.54 2x Front Lower Rearward Control Arm Fits 2000 2001 2002 2003 2004 2005 06 BMW X5 USD 50.38 QTY(2)Front Upper Control Arms Suspension Fits 05-11 Dodge Dakota Raider K620006 USD 55.36 New 4Pcs Front Lower Control Arms Steering Part Fits Audi A6 Quattro 2000 2001 USD 102.34 2Pcs K7055 Steering Idler Arms Part Fits 1974-1992 1993 Dodge Ram Ramcharger USD 40.35 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500 1.Fit For 1994-1999 Dodge Ram 2500 1995-1999 Dodge Ram 3500 2.Package Includes: 1x Pitman Arm -K7238 1x Idler Arm -K7225T 3.Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Brand : cfspeed-autoparts Manufacturer Part Number : C82727301 Placement on Vehicle : Front Universal Fitment : No Manufacturer Warranty : 10 Years Features : Greasable Items Included : Mounting Hardware Custom Bundle : No Type : Pitman Arm Interchange Part Number : K7238,K7225T OE/OEM Part Number : Pitman Arm,1994 95 96 97 98 1999 Dodge Ram 2500 Superseded Part Number : 1995 1996 1997 1998 1999 Dodge Ram 3500 Modified Item : No Adjustable : Yes Performance Part : No Material : Alloy Steel Payment PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries. All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. Returns WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. We stand behind every product we sell. All of our brand new items come with a 60-Days money-back guarantee. We define the item as defective only if it doesn’t function as described. It is the buyer’s responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. Shipping & handling cost are not refundable. Man-made damage by abuse or wrong operation is not covered by this warranty. No product liability insurance is assumed. Contact Us We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there’s any questions or problems with our products or service, feel free to contact us please. All rights reserved.

Frequently Asked Questions About QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500 in My Website

humusjardin.com is the best online shopping platform where you can buy QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500 from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling QTY(2) Front Pitman Arm Idler Arm For 1994 1995 1996 – 1999 Dodge Ram 2500 3500 on humusjardin.com?

humusjardin.com helps you to shop online and delivers Christian Louboutin to your doorstep. The best-selling Christian Louboutin on humusjardin.com are: Christian Louboutin Satin Lipstick * RON RON 310 * FULL SIZE (T) Christian Louboutin Black Leather Crystal Embellished Flats Sz 8 EU 38.5 (AS/IS) Christian Louboutin Rouge Louboutin On The Go Lipstick Soft Goji Travel Size New Christian Louboutin Lip Matte Lipstick * SURVIVITA (T) Christian Louboutin heels size 41.5 Christian louboutin Lace 1EN8 Mary Jane Pumps, Size 40 CHRISTIAN LOUBOUTIN Lady Peep 150 Black Patent Platform Pumps- Size 38.5 (US 8) Christian Louboutin Beige Patent Pigalle Pumps Size 39 sz 8.5 / 38.5 Christian Louboutin So Me Spike Black Leather Ankle Sandal Shoes Christian Louboutin SO KATE Pumps Christian Louboutin Spike Me Follies Glitter Size 38 US 7 High Heels Spikes CHRISTIAN LOUBOUTIN Enamel Loafers Black Round Toe Ribbon Size 35 2406R* Christian Louboutin KATE PLUME 100 Studded Camo Suede Heels Pumps Shoes Size 37 Christian Louboutin Sneakers Shoes Spiked Crystals Leather – Size EUR 44 / US 11 Christian Louboutin Cabata Tote Printed Patent Mini Red Bottom VWG 341755 Christian Louboutin Womens Isabelle 20th Anniversary Espadrille Wedges White Bla Christian Louboutin Beige Cork Lady Peep Toe Platform Pumps Size 38.5 Christian Louboutin Blade Runana 100 Denim Ankle Cuff Heels (Size 40) christian louboutin heels so kate 120 size 40 Christian Louboutin Turquoise Butterfly Crystal Margarita 100 Heels EU 40 CHRISTIAN LOUBOUTIN 60mm Pointed Toe White Patent Leather & PVC Pumps Size 41.5 Christian Louboutin Dos Noeud 120 Black Satin Peeptoe Pumps size 39 Women 5.0US Rare Christian Louboutin High Heels Black Enamel Lined From japan Rare2Find CHRISTIAN LOUBOUTIN JUMPING Beige CrossStrap PatentLeather Stilettos 6 Christian Louboutin Pumps Beige US6.5 USED 202409M Christian Louboutin Follies Lace 100 Multicolor Heels Pumps (Size 37.5) Christian Louboutin Nichel Laminato Leather Marie Pli 100 Sandals Size 5/35.5 Christian Louboutin Iriza Black Leather Pumps Heels Men’s Louboutin Shoes Sneakers Wingtip Multicolored Leather – Size 44 / US 11 Christian Louboutin Calfskin Altapoppins 150 Beige Pumps Ebcrdu 144030004735 christian louboutin Wedges Christian Louboutin Pumps Heel Pointed Toe Patent Leather Silver EU38/US8 RARE Christian Louboutin Pigalle 120 High Heel Pump Sz 39 or 7.5- Sold Out!! Christian Louboutin Hot Chick Stud Scallop 100 Black Suede Pump 41 Retail $845 Women 6.0US Louboutin Strap Open Toe Heel Christian Louboutin Iriza 100 Pink Satin Pumps Heels (Size 39.5) Christian Louboutin Slingback Pumps Black Patent Leather Shoes Womens 36.5 Christian Louboutin Swarovski Crystals Strass Purple Iriza Pumps Christian Louboutin | White Leather Silver Spiked Slip-on Yacht Loafers, Size 5 Christian Louboutin Grey Snakeskin Lady Daf Platform Pumps Size 36.5 Eb0524rxsa CHRISTIAN LOUBOUTIN VERO CUOIO 38.5 MUTED PINK LEATHER HEELS CHRISTIAN LOUBOUTIN womens shoes 38.5 Christian Louboutin Sneakers Shoes High-cut Studs Blue White Auth Japan Women 5.5US Christian Louboutin Long Boots Braided Suede Black christian louboutin sneakers men 42 1/2 Louboutin Christian Size 37/5 Christian Louboutin Clare Naturalle Cork Slingback Pumps louboutin men shoes black low 40.5 Women 7.0US Christian Louboutin Floral Pumps From Japan Women 6.0US Christian Louboutin Wedding Shoes Christian Louboutin Ishtar Botta Black Suede Christian Louboutin Geo Navy Stripe Red Spike Canvas Pumps Size IT 38 Christian Louboutin MISS SAB 55 Suede Block Heels Pumps Shoes Black $795 Women 6.5US Christian Louboutin Pumps High Heel Studded Leather From japan Christian Louboutin Women’s So-Jane Patent Sling Back Leather Off White/Cream Go Christian Louboutin Black Leather Rolondo Slingback Pumps EU 36.5 US 6.5 Christian Louboutin Red Bottom women high heel shoes size 10.5 Christian Louboutin Women’s Sz 37 US Kate 100 Nude Patent Pointed Heels Christian Louboutin Pigalle Follies 39 Eu Graffiti 100 Patent Heels Women 7.0US Christian Louboutin Sneakers CHRISTIAN LOUBOUTIN Black Leather Pump JENLOVE ALTA Peep Toe Platform Heels 36.5 Christian Louboutin Pigalle Plato Black Napa Leather Pumps Size 38 Christian Louboutin Black Patent Leather Cross Cross Spikes Pumps 39 IT Christian Louboutin Decolette 100 Patent Nude 39 Women 5.0US Df50 Christian Louboutin High Heels Enamel Red Black From japan Christian Louboutin NWD Hot Chick Slingback 100 Heels Size 38.5 US 8.5 in Lilac Christian Louboutin Nude Patent So Kate 85 Pointed Toe Pumps Size 39 Christian Louboutin Women Hot Chick Scallop 4″ High Heel Pumps Leopard Sz 39 NIB Christian Louboutin Dolly Patent Pumps Pre Owned Women Size US 9/EU 39 FREE SHIP Christian Louboutin Nude Margarita 100 Butterfly Crystal Heels EU 40 Authentic Christian Louboutin Patent Leather Pumps Women’s Size 39 US 9 Black Christian Louboutin Red Patent Leather So Kate Heels 37.5 Women 7.5US Pumps Christian Louboutin Petanco From Japan Christian Louboutin Black Red Ombree Patent leather Pumps Christian Louboutin Just Nothing Patent PVC Sandal authentic christian louboutin Luly Open Toed Mary Jane Pumps Slight Damage Christian Louboutin Size 39 Silver Crystal Embellished Pigalle Follies Pumps Auth Christian Louboutin Bianca black leather 140 heel platform pumps 40 EU Women 7.0US Christian Louboutin Sandals Heel Light Blue Gold 24Cm Christian Louboutin Viva Vida Low Top Sneakers Size 41/ US 8 Blue Christian Louboutin So Kate Nude Patent Leather Pumps Shoes Size 37 Christian Louboutin Silver Striped Sandal Heels 40 christian louboutin heels size 41 Christian Louboutin Teal Suede Gold Trim Mid High Heel Pumps W Bag 39.5 US 8.5 Christian Louboutin Beige Patent Leather RonRon Zeppa Wedge Pumps Size 39.5 US 9 Christian Louboutin Nude White Bow Pumps 38.5 IT AUTHENTIC Christian Louboutin Declic 120 Christian Louboutin Black Patent Leather Bianca Pumps Size EU 38.5 Women 6.5US Christian Louboutin Platform Enamel Open Toe Pumps Black Christian Louboutin Pump Heels 41 Pigalle Black Patent Leather US 11 Authentic christian louboutin heels 39 Christian Louboutin Multicolored Floral Leather Printed Pumps – Size 37 christian louboutin heels size 41 CHRISTIAN LOUBOUTIN BLACK PATENT LEATHER POINTED TOE PUMPS SIZE 5 EU 35 Christian Louboutin Pumps Heel Leather Red EU35/US5 18761c CHRISTIAN LOUBOUTIN Suede Degrastrasss 100 Pumps 37.5 Version Rose Indien Women 6.5US Christian Louboutin Lace Up Sandals Wedge Sole Made In Italy Christian Louboutin Pumps Heel Pointed Toe Black EU36/US6 AK24110209 Christian Louboutin Louis Junior Orlato Sneaker EU 40 US 10 Gold Satin Low Top Christian Louboutin Lip Satin Lipstick ** PLUMINETTE (T) Mens Pullover Fleece Hoodie

Laisser un commentaire