TEGARA 6" 660U CNC Milling Machine Vise 0.0004" New R[

TEGARA 6

$558.88 Buy It Now or Best Offer
free,30-Day Returns

Seller Store discount_machine
(264149) 99.9%,

Location: Saint Charles, Illinois
Ships to: US,
Item: 332467648817

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
MPN:202-0995
Shars Tool:Shars Tool
California Prop 65 Warning:WARNING: This product can expose you to chemicals including nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

TEGARA 6″ 660U CNC Milling Machine Vise +/-0.0004″ NewQuality You Can Count OnProduct Code 202-0995 Product descriptionSKU202-0995VISE CATEGORYMilling Machine VisesBRANDTegaraVISE APPLICATIONCNC Machine, Manual MachineJAW OPENING6.25JAW WIDTH6JAW DEPTH1.75 OVERALL LENGTH15.10BED HEIGHT +/-0.0005″3.189WITH SWIVEL BASENoJAW PLATE THREAD SIZE1/2″-13JAW PLATE THREADS SPACING (INCH)3.875CLAMPING FORCE (LBS)8000Product application Product features660U Advantage Pulling MechanismWith a heavy duty thrust bearing pack located on the rear of the vise body, the clamping force is a pulled rather than pushed motion. This pulling mechanism would reduce stress and minimize deflection on the vise body when applying high clamping pressure.Minimum Jaw LiftEvery machinist is afraid of the term « jaw lift » when associated with a vise. The 690X offers key improvements to prevent jaw lifting by using a 45 degree wedge and a pivoting ground finished steel hemisphere in a milled pocket to hold down the movable jaw. This results a minimal amount of jaw lift applying under pressure when comparing to other highly regarded go-to branded vises.6.25″ Opening Capacity6.25″ Opening capacity allows more clamping in a small footprint. With the 5 mounting thru holes with 5″ spacing on the vise bed would allow more vises mounting side by side on a milling table.Hardened Vise Bed / Jaw Plate-Vise jaw plate threads and spacing meets the industry standards- Bedways are flame hardened to 45 HRc and jaw plate hardened to 54 HRc- Bed height and the distance between keyway and stationary jaw remains the same and meets the industry standards- Bed height matched to 2.875″ +/- 0.0005″- Vises’ bed parallel to base within 0.0005″- Fixed Jaw perpendicular to bed within 0.0005″- Fixed jaw parallel to vise’s keyway within +/- 0.0005″Brush SealContinuing from the design feature in 690V vises, a brush on both end of spindle nut to wipe off chips to improve & extend the lead screw life.Large Chip Evacuation2 large chip evacuation slots are strategically located on each side of the vise to allow a good flow of chips while at the same time not diminishing the vise’s body strength. The vise body is also reinforced with a thicker rib to support the pulling mechanism when clampingMatching Bed HeightsWhen ordering multiple vises, the bed heights will be matched within .0001″ at no additional cost (subject to inventory stock availability)WarrantyTegara vise comes with 10 year limited warranty against defects in material and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear). Failure to properly maintain and/or properly operate the product or part under normal conditions will void this warranty. This warranty does not cover any product or part that has been worn out, abused, heated, ground or otherwise modified, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.WHAT’S INCLUDED Polish Handle2 pc of 11/16″ T-slot KeysFour toe clamps with T-nuts for 11/16″ T-slotsChip GuardInspection reportPARTS LIST660U-17660U-4-5660U-19LOCKING SCREW NUTVISE NUT AND BRUSH PAIRSLIDE COVER690V-KEY2660U-2660U-18VISE KEY 11/16″MAIN SCREWSTABLE SCREW NUT690V-KEY1690V-14STEPPED VISE KEY 11/16″ TO 5/8″JAW PLATERelate productClick the product code to the item page6 x 2 x 1″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10816 x 2 x 1.25″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10826 x 2 x 1.5″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-1083 8 x 2 x 1″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10846 x 3 x 1″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10858 x 2 x 1.5″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-1086 8 x 2 x 1.25″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10876 x 2 x 2″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-10886 x 3 x 1.5″ Aluminum Soft Jaws for 6″ Kurt Type Vise USA Made Product Code:202-1089All Available to Ship NOW! at Fixed Prices SHIPPING: UPS GroundBuyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package’s recipient may need to pay these to clear customs. PAYMENT: We accept VISA, MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller’s discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools, feel free to email us at our eBay Message Box

Frequently Asked Questions About TEGARA 6″ 660U CNC Milling Machine Vise 0.0004″ New R[ in My Website

humusjardin.com is the best online shopping platform where you can buy TEGARA 6″ 660U CNC Milling Machine Vise 0.0004″ New R[ from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling TEGARA 6″ 660U CNC Milling Machine Vise 0.0004″ New R[ on humusjardin.com?

Humus Jardin

TEGARA 6" 660U CNC Milling Machine Vise 0.0004" New R[

Frequently Asked Questions About TEGARA 6″ 660U CNC Milling Machine Vise 0.0004″ New R[ in My Website

What are the best-selling TEGARA 6″ 660U CNC Milling Machine Vise 0.0004″ New R[ on humusjardin.com?

Laisser un commentaire Annuler la réponse