THE ORIGINAL Master Deluxe Kit (The Whole Gamut!)

$2059.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store jasonsworks
(175) 100.0%,

Location: Paso Robles, California
Ships to: US,
Item: 116382797117

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Jason’s Works TM:Jason’s Works TM
Type:Tool Set
Seller Warranty:Yes
Color:Gold
Material:tool steel, stainless steel, wood, resin, bronze
Set Includes:Punch,Tool Organizer
Country/Region of Manufacture:United States
Suitable For:Jewelry Making,Metalsmithing,Punching/Stamping,Shaping

The biggest savings when you purchase this kit!This kit is designed for the person who wants every Jason’s Works tool, the best of the best!Even before I started offering tools (I was directing people in my manual to my machinist to make them tools at the time), my machinist told me he kept getting requests for “the whole gamut” of tools. Well, that is finally available!This kit includes:– 9 piece Auto punch kit (does not require spacers)– 11 piece reduction die kit– Folding and stretching kit– Master Swede kit– Three rolls of pipe tape– Three Jason’s Works Stickers– Jason’s Works business cardAlways wear safety glasses when using this punch/die set and a brass hammer. *COINS AND RINGS NOT INCLUDED**NOTE: these taller bronze plungers are specially designed to bottom out when the plunger is flush with its corresponding die (see pictures above). This removes the chance of damaging the plungers by over pressing especially when using a hydraulic press.It is o.k. for the plungers to have small dings and scratches when they become well used. If need be, you can always lap the surfaces using a piece of 200 grit sandpaper.*NOTE: Remember the 5 most important steps in the Swedish Wrap method.1. Anneal a lot. Preferably once for every plunger distance when working with silver. Up to two with brass. Better to anneal too often than not enough.2. Use lots of pipe tape, re-wrap after each press/anneal. Better to use too much than too little. I wrap up to 30 times for a half dollar and 40 times for a dollar if I’m using the thin tape. It depends on the thickness of the tape and how tough the coin is. Luckily it’s cheap. Rolls can be found for well under a dollar at stores or online.3. It is better to press the reed side. Prior to pressing, make sure the plunger completely covers the reed side of the coin. If it does not, use a 17 or 25 degree die to fold in the reed side until the plunger covers the reed side.4. Do not over-press the plungers when using a hydraulic press or large arbor press. Know where each plunger bottoms out on the dies.5. Feel free to experiment with different ideas and have fun!The Ross Push Follower designed for Jason’s Works Swedish Dies, The Small is for the .6 x .9 Quarter Swede die, Medium is for the .8 x 1.1 half dollar Swede die, and the Large is for the 1.0 x 1.4 Dollar Swede DieConceived by Sam Ross Scafferi with Ross Coin Rings, the push followers have been slightly modified from his original design to efficiently press rings down and through Jason’s Works Swedish Wrap Dies (The coin ring technique called the Swedish Wrap, created by Mikael Möller from Sweden). Sam contacted me with his idea and wanted to see if this could be presented to the coin ring community to help with using the Swedish Wrap technique. With Sam’s prototype and much help from many people, the Ross Push Follower is now available. These are designed for light to medium duty. You can fully press and extrude a silver quarter, silver half dollar, and silver dollar through their respective Swede die with only one anneal.*NOTE* The bronze plungers are still the best for heavy duty pushing.How to use the Ross Push Follower:1. Fold and reduce the coin ring as needed to fit into a Swedish die.2. Anneal and wrap the ring with pipe tape.3. Lube the inside of the die with coconut oil (Thank you Adam McKinney for that tip!)4. Press your wrapped coin, reed side down, into a 25 degree die. This will cut the tape around the edge of the reed. (See picture above) This helps to keep the pusher fromslipping into the ring and damaging the pusher.5. Insert the coin ring into the appropriate Swede die reed side up (see picture above).6 Press using an arbor press or similar press and rotate the Pusher between short presses. This reduces the likelihood of deforming the ring (see picture above).7. To have a perfectly straight wall, flip the ring over to the reed side down just before you reach your target size. Reduce to your target size with the reed side down.8. To have a more rounded ring (fat tire or synclastic) remove the ring a few sizes above your target size and finish in a 25 degree reduction die.9. Use the witness lines for repeatable sizing of your rings.Tips and tricks:1. Do not over press. These pushers are designed for light to medium duty. The first sign of failure is when the leg or post of the pusher begins to bend. When high pressures areneeded, the bronze pushers are best to use.2. If you do over press and damage the pusher, it will most likely chip the edge of the pusher. This can be repaired by compressing the pusher’s legs with a zip tie (see above picture) and sanding, filing, grinding the face flat while compressed. (Thank you Skyler Jenkins for this tip!). These are considered consumable but with proper use and maintenance, they can last a lifetime.3. If the pusher begins to have a « memory » of a taper. You can insert the 1/4? mandrel (see picture above) to regain the original straight shape. Leave the mandrel in overnight forbest results.*A special thank you to Mikael Möller, Robert Gibb (BFG Coin Rings), Bob, Russ, Troy, Mike Henry, Adam McKinney, Skyler Jenkins (Coin Rings by the Mint), Rocky Workman, Joshua Janes and countless others on Coin Ring Crafters on Facebook. You all made this possible!

Frequently Asked Questions About THE ORIGINAL Master Deluxe Kit (The Whole Gamut!) in My Website

humusjardin.com is the best online shopping platform where you can buy THE ORIGINAL Master Deluxe Kit (The Whole Gamut!) from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling THE ORIGINAL Master Deluxe Kit (The Whole Gamut!) on humusjardin.com?

Humus Jardin

THE ORIGINAL Master Deluxe Kit (The Whole Gamut!)

Frequently Asked Questions About THE ORIGINAL Master Deluxe Kit (The Whole Gamut!) in My Website

What are the best-selling THE ORIGINAL Master Deluxe Kit (The Whole Gamut!) on humusjardin.com?

Laisser un commentaire Annuler la réponse