TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+

$134.2 Buy It Now or Best Offer
free,30-Day Returns

Seller Store wittrans
(21698) 98.3%,

Location: Shepherdsville, Kentucky
Ships to: US,
Item: 175374552353

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Return policy details:
OE/OEM Part Number:T74171,700-2&3
Surface Finish:New
Type:Shift Kit
Fitment Type:Performance/Custom
Drive Type:4WD
Manufacturer Part Number:700-2&3,T74171
TransGo:TransGo
Manufacturer Warranty:Unspecified Length
Items Included:Gasket

This 700-2&3 Reprogramming Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission.Features and benefits:This TransGo Reprogramming Kit is designed for all-out shift performance. Installing this kit into Grandma’s Caprice will end your monthly visits from her and that means no more apple pie!There are two installation options with this kit. The first option gives you fully automatic shifts in “D” as well as the ability to hold any gear to any speed with the shift lever. It also allows for downshifts to any gear at any speed by moving shift lever. High throttle 3-4 shift is controlled by shift lever. The second option gives you manual shifts only. The transmission will start off in whatever gear the shift lever is in and will shift to any gear at any speed by moving the shift lever. This kit also includes our #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher.Lastly the kit can be installed with the transmission in vehicle or on the bench. However, transmission removal is necessary to install the clutch piston return spring kit.Corrects/Prevents/Reduces:Burnt 2-4 band and 3-4 clutch platesBurnt forward and low/reverse clutch platesProvides fully automatic shiftsProvides full manual control option for upshifting and downshifting 1st through 4th gearIncludes:Pressure regulator valve spring and snap ring(3) Valve body plugs(2) Drill bits(3) TV valve springs, TV valve, spacer and aluminum washer(3) 2nd accumulator valve springs(2) Line bias valve springs(2) USA-made hardened steel 3-2 control valves, springs and end plugs3-4 Shift valve spring2-3 Shift valve spring(5) Separator plate plugs(2) Case tapered orifice plugsCase tapered plug(6) Washers for band adjustmentServo springGovernor springValve body gaskets3-4 clutch return springs and orifice capsuleForward clutch return springs and installation washer A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other itemsThis 700-2&3 Reprogramming Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission. Features and benefits: This TransGo Reprogramming Kit is designed for all-out shift performance. Installing this kit into Grandma’s Caprice will end your monthly visits from her and that means no more apple pie! There are two installation options with this kit. The first option gives you fully automatic shifts in “D” as well as the ability to hold any gear to any speed with the shift lever. It also allows for downshifts to any gear at any speed by moving shift lever. High throttle 3-4 shift is controlled by shift lever. The second option gives you manual shifts only. The transmission will start off in whatever gear the shift lever is in and will shift to any gear at any speed by moving the shift lever. This kit also includes our #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher. Lastly the kit can be installed with the transmission in vehicle or on the bench. However, transmission removal is necessary to install the clutch piston return spring kit. Corrects/Prevents/Reduces: Burnt 2-4 band and 3-4 clutch plates Burnt forward and low/reverse clutch plates Provides fully automatic shifts Provides full manual control option for upshifting and downshifting 1st through 4th gear Includes: —Pressure regulator valve spring and snap ring —(3) Valve body plugs —(2) Drill bits —(3) TV valve springs, TV valve, spacer and aluminum washer —(3) 2nd accumulator valve springs —(2) Line bias valve springs —(2) USA-made hardened steel 3-2 control valves, springs and end plugs —3-4 Shift valve spring —2-3 Shift valve spring —(5) Separator plate plugs —(2) Case tapered orifice plugs —Case tapered plug —(6) Washers for band adjustment —Servo spring —Governor spring —Valve body gaskets —3-4 clutch return springs and orifice capsule —Forward clutch return springs and installation washer This 700-2&3 Reprogramming Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission.Features and benefits:This TransGo Reprogramming Kit is designed for all-out shift performance. Installing this kit into Grandma’s Caprice will end your monthly visits from her and that means no more apple pie!There are two installation options with this kit. The first option gives you fully automatic shifts in “D” as well as the ability to hold any gear to any speed with the shift lever. It also allows for downshifts to any gear at any speed by moving shift lever. High throttle 3-4 shift is controlled by shift lever. The second option gives you manual shifts only. The transmission will start off in whatever gear the shift lever is in and will shift to any gear at any speed by moving the shift lever. This kit also includes our #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher.Lastly the kit can be installed with the transmission in vehicle or on the bench. However, transmission removal is necessary to install the clutch piston return spring kit.Corrects/Prevents/Reduces:Burnt 2-4 band and 3-4 clutch platesBurnt forward and low/reverse clutch platesProvides fully automatic shiftsProvides full manual control option for upshifting and downshifting 1st through 4th gearIncludes:Pressure regulator valve spring and snap ring(3) Valve body plugs(2) Drill bits(3) TV valve springs, TV valve, spacer and aluminum washer(3) 2nd accumulator valve springs(2) Line bias valve springs(2) USA-made hardened steel 3-2 control valves, springs and end plugs3-4 Shift valve spring2-3 Shift valve spring(5) Separator plate plugs(2) Case tapered orifice plugsCase tapered plug(6) Washers for band adjustmentServo springGovernor springValve body gaskets3-4 clutch return springs and orifice capsuleForward clutch return springs and installation washer A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items This 700-2&3 Reprogramming Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission.Features and benefits:This TransGo Reprogramming Kit is designed for all-out shift performance. Installing this kit into Grandma’s Caprice will end your monthly visits from her and that means no more apple pie!There are two installation options with this kit. The first option gives you fully automatic shifts in “D” as well as the ability to hold any gear to any speed with the shift lever. It also allows for downshifts to any gear at any speed by moving shift lever. High throttle 3-4 shift is controlled by shift lever. The second option gives you manual shifts only. The transmission will start off in whatever gear the shift lever is in and will shift to any gear at any speed by moving the shift lever. This kit also includes our #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher.Lastly the kit can be installed with the transmission in vehicle or on the bench. However, transmission removal is necessary to install the clutch piston return spring kit.Corrects/Prevents/Reduces:Burnt 2-4 band and 3-4 clutch platesBurnt forward and low/reverse clutch platesProvides fully automatic shiftsProvides full manual control option for upshifting and downshifting 1st through 4th gearIncludes:Pressure regulator valve spring and snap ring(3) Valve body plugs(2) Drill bits(3) TV valve springs, TV valve, spacer and aluminum washer(3) 2nd accumulator valve springs(2) Line bias valve springs(2) USA-made hardened steel 3-2 control valves, springs and end plugs3-4 Shift valve spring2-3 Shift valve spring(5) Separator plate plugs(2) Case tapered orifice plugsCase tapered plug(6) Washers for band adjustmentServo springGovernor springValve body gaskets3-4 clutch return springs and orifice capsuleForward clutch return springs and installation washer

Frequently Asked Questions About TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+ in My Website

humusjardin.com is the best online shopping platform where you can buy TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+ from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+ on humusjardin.com?

Humus Jardin

TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+

Frequently Asked Questions About TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+ in My Website

What are the best-selling TransGo 700R4-2&3 Reprogramming Kit High Performance Valve Body Shift Kit 1982+ on humusjardin.com?

Laisser un commentaire Annuler la réponse