Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal

$49.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store federal_parts
(9625) 99.7%,

Location: San Jose, California
Ships to: US,
Item: 204895462564

Returns Accepted:ReturnsNotAccepted
Borg-Warner T90:Borg-Warner T90
Type:Manual Transmission
OE/OEM Part Number:210-0580
Manufacturer Part Number:2100580

Made in USA NOS US Mil-Spec Part Borg-Warner T90 Transmission Clutch Release Bearing Retainer & input shaft seal Input shaft Retainer + new shaft seal for Jeep CJ2A Willys MB GPW with T90 Transmission and other T90 applications Front input shaft bearing retainer with seal included. T-90Fits other model T90 A,B,C, check list.Fits Jeeps and GM, with 3 bolt hole pattern.Clutch Fork pressed pin includedFront input shaft seal included Gasket not included Same day shipping process within lower 48 US states (delivery date may vary from zip code) For AK, HI contact us OEM part in stock,made in USA Fits 1940-1971Fits T90 3 speed transmissionNew old Stock post WW2 OEM US Mil-Spec Borg-Warner T90 Transmission The Borg-Warner T90 transmission was one of the most common transmissions found in 1946 to 1971 Jeeps. Because of its long production span, it is nearly legendary. It is a good transmission when well maintained and has often been adapted to V8, V6 and I4 power. The T90 was the improved progeny of the T84, of military MB & GPW fame. The T90 was the standard three-speed as found in CJ Universals, Utility Trucks & Wagons, J Series and Forward Control Trucks. The T90 is a top loaded, top shifting or side shifting transmission. The T90 is fully synchronized in the second and third gears. All gears are helically cut except first and reverse, which are spur gears. The T90 transmission is 9″ long and features a cast iron top cover that is retained by six bolts and a main case of cast iron. The case itself has a prominent bulge on the driver’s side with two protruding bosses as provisions for side-shifting actuators. All 4wd T90 transmissions have a 1-3/8″ x 6 spline output shaft for mounting the transfer case input gear. A 2wd version of the T90 does exist and was installed in some Jeeps but is a rarity. Jeeps also had a T86 transmission that appears similar to the T90. Many parts interchange, however first & reverse gears are helically cut in the T86 in lieu of the spur cut gears in the T90. There are three major versions of the T90 to differentiate. T90A1 The T90 used from 1946 to 1962 with the L and F-head four-cylinder engines is designated as the T90A1. These versions all feature top shifters, a 7″ input shaft (stick-out length) with 15/16″ x 10 splines and a felt-sealed front bearing retainer assembly. The input shaft has an 18 tooth, helically cut input gear. The cluster gear has a 33 tooth driven gear, resulting in a 2.79:1 first gear and a 1.55:1 second gear. T90C The T90 used from 1963 to 1971 with the F-head four-cylinder engine is designated as the T90C. It features top shifters, a 7″ input shaft (stick-out length) with 15/16″ x 10 splines and a felt-sealed front bearing retainer assembly. Since the T90C uses a case marked « T90A », you will need assurance that the transmission in question came from a post-’62 Jeep, or you will need to pull the top cover and count teeth. The T90C has a 16 tooth, helically cut input gear. The cluster gear has a 35 tooth driven gear, resulting in a 3.34:1 first gear and a 1.85:1 second gear. T90J The T90J was used with the six-cylinder trucks from 1952 to 1965. These were either column or floor shift models. They had an ~9-1/4″ input shaft (stick-out length) with a 10 x 1-1/8″ splines and a neoprene-sealed front bearing retainer assembly. The T90J has an 18 tooth, helically cut input gear. The cluster gear has a 33 tooth driven gear, resulting in a 2.79:1 first gear and a 1.55:1 second gear.

Frequently Asked Questions About Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal in My Website

humusjardin.com is the best online shopping platform where you can buy Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal from renowned brand(s). humusjardin.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal on humusjardin.com?

Humus Jardin

Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal

Frequently Asked Questions About Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal in My Website

What are the best-selling Willys Jeep M38 M38A1 CJ2A CJ5 T90 Transmission Front Bearing Retainer with seal on humusjardin.com?

Laisser un commentaire Annuler la réponse